Part No : B-0904-BAK-0216-GX
Make : BIBA ELECTRONICS
B-0904-BAK-0216-GX
Embedded processor board featuring All Winner A133 Cortex-A53 quad-core processor with a maximum frequency of 1.6 GHz. It supports optional RAM configurations of 1 GB, 2 GB, or 4 GB, and includes 8 GB of flash memory along with SD card support. Connectivity options include WiFi, Bluetooth, and Ethernet, and it is compatible with Android 10 and Linux 18.04.
Genuine Product Fast Dispatch Secure Payment
Power input: 9~15V DC wide-voltage. PCB size: 100mm x 80mm x 9mm (PCBA top-side height 7mm), 3.4mm mounting holes. Storage temperature: -40 to 70 Deg C. Humidity: non-condensing. I/O: 5x GPIO, standard IR remote receiver, optional single-pole double-throw door-control relay, I2C header, blue run LED, recovery and power buttons. Source: vendor spec sheet ZC-A133L V1.0 (2023-07-18).
Specifications
CPU
Allwinner A133, quad-core Cortex-A53, up to 1.6GHz
GPU
PowerVR GE8300 (OpenGL ES 3.2, Vulkan 1.1, OpenCL 1.2)
MEMORY
LPDDR4 1GB (2GB / 4GB optional)
STORAGE
8GB eMMC NAND (expandable up to 128GB), self-ejecting TF card socket (up to 128GB)
DISPLAY
LVDS and MIPI-DSI output, single screen, up to 1080P
SYSTEM
Android 10 (recommended), Linux optional
NETWORK
10/100M Ethernet RJ45 with 4-pin PoE header; WiFi 802.11 b/g/n/ac (2.4GHz default); Bluetooth 4.2
MULTIMEDIA
Full HD video codec, 4Kx2K@30fps video decoding; USB camera up to 2MP supported
USB
2x USB 2.0 Type-A (one is OTG), 3x USB 2.0 pin headers
SERIAL PORT
1x TTL/RS-232, 1x TTL/RS-232/RS-485 (on-board headers)
LVDS OUTPUT
30-pin dual-channel LVDS, VESA/JEITA format, up to 1080P
EDP
Not supported (display output is LVDS / MIPI-DSI only)
HDMI
Not supported (display output is LVDS / MIPI-DSI only)
TOUCH PANEL
I2C capacitive touch panel via I2C header
AUDIO
4-pole CTIA HP/MIC 3.5mm jack, stereo line output, 8 Ohm 6W dual-channel amplifier output, differential MIC input
RTC
Ultra-low-power RTC with CR1220 coin cell, timer and alarm
TIMER SWITCH
Scheduled power on/off supported (RTC timer)
GPIO
5x GPIO signals (GPIO buttons and/or 3.3V digital I/O)
INFRARED REMOTE
Standard IR remote receiver and IR receiver pin header
BACKLIGHT CONTROL
Industry-standard LCD backlight control header (switch and brightness adjustment)
SYSTEM UPGRADE
Recovery mode button (SW1) for firmware flashing
POWER INPUT
9~15V DC wide-voltage input
OPERATING TEMPERATURE
-20 to 70 Deg C